Product Details:
Display Type | Digital, Analog |
Brand | Honeywell |
Model Name/Number | XCD Senspoint SPXCDALMFX |
Measurement Range | 15 Feet |
Status Indication | Normal,Fault and Alarm |
Dimensions | L312mm (12.3") x W223mm (8.8") x D110mm (4.3") |
Signal Output | Voltage,Digital,Modbus,Potential Free Contact |
Temperature | -20 DegreeC / -4 DegreeF to 55 DegreeC / 131 DegreeF |
XCD Senspoint: Flammable Toxic Gas Detector : Honeywell - SPXCDALMFX range provides comprehensive monitoring of flammable, toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.
There are three different types of the XCD transmitter for use with three different families of sensors.
The mV type transmitter is for use with the mV family of XCD sensors including catalytic sensors to detect flammable gases in the range 0-100%LEL and infrared (IR) sensors for detection of Hydrocarbon gases in the range 0-100%LEL. Two IR Hydrocarbon sensors are available; one linearised to Methane and one linearised to Propane. The Propane version has linear cross sensitivities factors for Ethylene, Butane and Pentane. There is also an IR CO2 sensor available in the range 0-2%Vol. The EC type transmitter is for use with the EC family of XCD sensors including Carbon Monoxide (CO), Hydrogen Sulphide, (H2S), Nitrogen Dioxide (NO2) and Hydrogen (H2).
The Oxygen transmitter is for use with the Oxygen (O2) XCD sensors. A transmitter can auto-recognise any sensor from within its sensor family. The sensor simply plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly.
Sensepoint XCD uses three instantly recognisable ‘traffic light’ colours to indicate its status. The large tri-colour backlit LCD is steady green to indicate normal operation, flashes yellow to indicate a fault/warning and flashes red to indicate an alarm. This allows anyone in the area to clearly see at a glance the status of any detector. This can be particularly useful to identify detector status if the detector is located in a difficult to access area or if a number of detectors are located in the same area.
Additional Information:
- Item Code: XCD-Senspoint-SPXCDALMFX
- Delivery Time: 8 to 10 Weeks