Fire Alarm System

Product Details:

Features of ZX5Se Fire alarm System:

• The initial installation of the system is aided by sophisticated features like AUTOLEARN
• An internal routine that will automatically detect all the devices on the detection and peripheral loops saving valuable commissioning time
• An off-line Windows™ configuration tool is included to further enhance the process, making text entry and specific, complex device programming easier
• Complex cause and effect programming is simplified through a clearly designed user interface
• Once completed the configuration of the panel by Fire Projects, which can be saved for future reference
• Enhanced features allow the complete archiving of the control panel history log
• Event logic – facilitates complex cross-panel programming
• Auto-learn facility allows rapid and accurate commissioning of devices
• Windows™ configuration tool allows off-site programming
• Facility to print history and event logs

Other details:

• ZXSe range by Morley-IAS, installed by Fire Projects supporting a total of five industry leading protocols, Apollo, Hochiki ESP, Nittan, Morley-IAS and System Sensor, allows fire detection devices to be independently selected based on performance or aesthetic appeal
• The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system
• Standard weekly testing is available through a simple menu structure allowing selection of the zones to be tested either with or without activation of the output relays or sounders
• Additionally, Fire Projects can configure the status of individual devices can be analysed to determine whether cleaning or replacement is required

Networking Features:

• The Morley-IAS network is a unique, robust protocol that can be used over long distances, and utilise many different types of fire resistant cabling
• All versions of the ZXSe range can be connected together creating a network of up to 99 control panels
• The flexible network can be configured in two ways
• Shared Zone System - Each networked control panel shares information
• Report & Control System - For multiple building sites where information is presented at the local and master panels only
• A compliant fault tolerant network can be created using the additional, optional Hi-485 network card
• 99 panel network allows systems in excess of 60,000 devices to be managed

User Interface:

• A quick glance enables users to assess the condition of the fire alarm system
• Alarm and Fault conditions are highlighted by LEDs and supported by enhanced text descriptions on the LCD display
• Clearly labelled buttons allow users to quickly manipulate the system providing both audible and tactile feedback of successful operations
• The panel has 3 access levels. Level 1 is unprotected and allows basic user functions
• Level 2 is passcode protected and allows more advanced user functions
• Level 3 is protected by a different passcode and allows programming functions
• 4x40 – Character LCD alphanumeric display with back-light
• Up to 200 zone LEDs (by special request)
• Up to 10 individual level 2 user access codes
• Optional lockable glass door – provides added security/protection

Key Features of Morley-IAS ZXSe Range of Fire Alarm Control Panel Installed by Fire Projects:

• Multi-protocol
• Modular concept
• Simple, robust design to EN54 Parts 2 & 4
• Intuitive to use
• Easy to maintain
• Easy to expand
• Easy to network
• Easy to install
• Easy to configure

Additional Information:

• Item Code: 721-001-301
• Delivery Time: 4 to 5 Weeks

Product Details:

Fire Projects deals in DXc4-Morley-IAS 4 Loop Fire Alarm System's Features:

• Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops)
• True peer-to-peer and fault tolerant network for high system reliability
• BS5839 part 1 compliant network

 
Panel Features:

• Optional 40 or 80 zone alarm LEDs
• Easy 5 key-press set-up
• Large blue LCD display
• Supports USB upload/download
• Mobile phone style keypad and navigation keys
• Option to upload a company logo

 
Software Features:

• PC confi guration software (supplied with panel)
• 80 fi re zones (can be used with or without LEDs)
• 7 day timers
• Event logging
• Onboard diagnostics
• Class change function
• Coincidence and verifi cation detection for false alarm management
• Sensitivity adjustment e.g. between day and night
• Input/output logic

 
Hardware Features:

• Battery backed real-time clock (2 & 4 loop)
• 2 independent sounder circuits
• 500mA multi-protocol loop driver
• 2 x onboard monitored inputs
• Optional programmable keyswitch for selected functions
• Plug-in connectors

Fire Projects is providing fire alarm system AMC service and service support for Ahmedabad, Vaodara, Vapi, Ankleshwar, Dahej, Sanand and Vithalapur Loation.

Additional Information:

• Item Code: 714-001-245
• Delivery Time: 4 to 5 Weeks

Product Details:

The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings. All in all, a compact, high performance, feature rich, economical fire alarm control panel designed to help both the installer and the end user.The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

 

The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fire panel on the market to install. Simply fix the control panel to the wall, connect the field wiring, power up and in as few as five button presses you can have a compliant, working fire alarm system. The panel’s large graphical display provides a clear menu structure making the whole initial set-up process quick, clear and intuitive.

 

DXc range Morley-IAS addressable fire alarm control panels are available with large blue LCD display and support user to create 40 to 80 zone alarm with option to upload company logo.  DXc1 (1 Loop fire alarm control panel) , DXc2 (2 Loop fire alarm control panel) and DXc4 (4 Loop fire alarm control panel) addressable fire alarm control panel supports Apollo (Xplore, XP95 and Discovery), Hochiki (ESP) & System Sensor protocol devices.

 

Additionally, programming the control panel couldn’t be easier. Complex configuration can be achieved by using either the panel’s mobile phone style key pad or by using the Windows PC programming tool supplied with the panel. The flexible PC programming tool also allows text messages for devices or zones to be imported from an Excel spread sheet, saving further time.

Additional Information:

• Item Code: 714-001-225
• Delivery Time: 3 to 4 Weeks

Product Details:

Fire Projects Pvt Ltd Supply, Install, Test and Commission Honeywell STX Half Loop Fire alarm panel is designed keeping in mind the needs of today’s performance conscious establishments. It is a range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The STX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall,connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile app and the Bluetooth dongle connectivity.
Listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: S36244
KEY FEATURES OF STX-Half Loop Fire alarm Panel:

• Multiple loop options –half
• Up to 98 devices per full loop
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864

INTERFACES: 
• 3 Output Relays with single pole changeover 24V DC 1 A: Fire Trouble & Programmable (Supervisory by default)
• 1 RS485 port for up to 4 repeaters or mimics or a combination of the two
• 1 RS232 ports: One for serial printer
• 2 USB ports: One for pen drive and Honeywell Bluetooth dongle and one reserved for future use
• 1 NAC circuit with max 150 mA
• 2 on-board monitored inputs
 
Fire Projects is providing fire alarm system AMC service and service for STX-1 Model of Morley-IAS which is Half Loop Addressable Fire Alarm System. We do AMC servicet for Ahmedabad, Vaodara, Vapi, Ankleshwar, Dahej, Sanand and Vithalapur Loation.

Additional Information:

• Item Code: 615-000-002
• Delivery Time: 5 TO 6 wEEK

Product Details:

Fire Projects Pvt Ltd Supply, Install, Test and Commission Honeywell STX 1 Loop Fire alarm panel is designed keeping in mind the needs of today’s performance conscious establishments. It is a range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The STX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall,connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile app and the Bluetooth dongle connectivity.
Listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: S36244
KEY FEATURES OF STX-1 Single Loop Fire alarm Panel:

• Multiple loop options –half
• Up to 98 devices per full loop
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864

INTERFACES: 
• 3 Output Relays with single pole changeover 24V DC 1 A: Fire Trouble & Programmable (Supervisory by default)
• 1 RS485 port for up to 4 repeaters or mimics or a combination of the two
• 1 RS232 ports: One for serial printer
• 2 USB ports: One for pen drive and Honeywell Bluetooth dongle and one reserved for future use
• 1 NAC circuit with max 150 mA
• 2 on-board monitored inputs

Additional Information:

• Item Code: 615-000-102-R
• Delivery Time: 5 to 6 Week

Product Details:

The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system. Standard weekly testing is available through a simple menu structure allowing selection of the zones to be tested either with or without activation of the output relays or sounders.

Additionally, the status of individual devices can be analysed to determine whether cleaning or replacement is required.

As the installation grows by Fire Projects Pvt Ltd the ZXSe panel can expand with the building or site by adding additional devices, loop cards, printers or repeater panels. Additionally, further ZXSe panels can be networked together allowing an even bigger system to be created.

Remote (or local) printers can easily be connected to provide a paper copy of events as and when they occur or provide a historical record.

• All major device manufacturers devices supported
• Optional, local or remote printers
• Walk test facility
• Provide up to 72hr stand-by (subject to verification)

 

Additional Information:

• Item Code: 722-001-301
• Delivery Time: 5 to 6 Weeks

Product Details:

The SMX model is designed keeping in mind the needs of today’sperformance conscious establishments. Fire Projects Pvt Ltd deals in range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The SMX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall, connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile appl and the Bluetooth dongle connectivity.

USER INTERFACE
Display: 5-inch multi-color touch display
Control Keys: Silence Buzzer, Silence/Resound Alarm, Reset
Indicators: Power, Alarm Silenced, Trouble, System Trouble, Disabled Test Supervisory, Delay
 

Additional Information:

• Item Code: 915-100-102
• Delivery Time: 6 to 7 Week

Product Details:

Key Features of NFS2-640 Notifier Intelligent Fire Alarm Panel:

• Certified for seismic applications when used with the appropriate seismic mounting kit.
• Approved for Marine applications when used with listed compatible equipment.
• One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.
• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology.
• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/636 per FACP or network node.
– Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG.
– Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.
• Standard 80-character display, 640-character large display (NCA-2), or display-less (a node on a network).
• Network options:
– High-speed network for up to 200 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA).
– Standard network for up to 103 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/ 400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging.
• 6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online or offline programming utility. Upload/ Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.
• Autoprogramming and Walk Test reports.
• Multiple central station communication options:
– Standard UDACT
– Internet
– Internet/GSM
• 80-character remote annunciators (up to 32).
• EIA-485 annunciators, including custom graphics.
• Printer interface (80-column and 40-column printers).
• History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.
• Alarm Verification selection per point, with automatic counter.
• Presignal/Positive Alarm Sequence (PAS).
• Silence inhibit and Auto Silence timer options.
• March time/temporal/California two-stage coding/strobe synchronization.
• Field-programmable on panel or on PC, with VeriFire Tools program check, compare, simulate.
• Full QWERTY keypad.
• Battery charger supports 18 – 200 AH batteries.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
• Automatic time control functions, with holiday exceptions.
• Surface Mount Technology (SMT) electronics.
• Extensive, built-in transient protection.
• Powerful Boolean logic equations.
• Support for SCS Series smoke control system in HVAC mode.

Additional Information:

• Item Code: NFS2-640
• Delivery Time: 6 to 7 Weeks

Product Details:

The SMX model is designed keeping in mind the needs of today’sperformance conscious establishments. Fire Projects Pvt Ltd deals in range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The SMX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall, connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile appl and the Bluetooth dongle connectivity.

USER INTERFACE
Display: 5-inch multi-color touch display
Control Keys: Silence Buzzer, Silence/Resound Alarm, Reset
Indicators: Power, Alarm Silenced, Trouble, System Trouble, Disabled Test Supervisory, Delay

 

Additional Information:

• Item Code: 915-100-202G
• Delivery Time: 6 to 7 Weeks

Product Details:

Ravel 8 Zone Conventional Fire Alarm Control Panel - RE-2558 is UL Listed Conventional Fire Alarm control Panel. These control panels are designed to be used in small & medium commercial industries, buildings, hotels, schools, etc. and are compatible with conventional detectors, manual call points and normally open dry contact devices.

Features:

• Switched Mode Power Supply (95-245)V
• Modular Construction
• Auto Resettable Fuse
• Surge Protection
• Programmable AC loss delay/Trouble Remainder/Alarm Verification
• Battery polarity reversible protection
• Surface Mount Technology
• Over All current consumption is low.
• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).

Additional Information:

• Item Code: RE-2558
• Delivery Time: 5 to 6 Weeks

Product Details:

Fire Annunciator LCD Panel by Morley-IAS: 315-080 is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The 315-080 and the FACP communicate over a two-wire serial interface employing the Repeater-Buscommunication format. Connected devices are powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply.

The 315-080 displays English-language text of system point informa-tion including device type, zone, independent point alarm, trouble or supervisory status, as well as any custom alpha labels programmed into the control panel. It includes control switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) Up to eight 315-080 repeaters may be connected to the Repeater-Bus of each FACP. No programming is required, which saves time during system commissioning.

Fire Annunciator LCD Panel by Morley-IAS: 315-080 Controls and Indicators:

• AC Power
• Alarm
• Supervisory
• Alarm Silenced
• Trouble

Additional Information:

• Item Code: 315-080
• Delivery Time: 5 to 6 Weeks

Product Details:

2 Zone Fire Alarm Control Panel, Ravel: RE-102 is a right blend of affordability design, user friendly, latest technology and quality for fire alarm panels. While implementing the latest in microprocessor technology for conventional panels ease to operate along with clear visible indications come at an advantage for the end user. These are stand alone panels with 2 & 4 zones versions. It has the optional facility for zone wise sounder / relay contacts

Additional Information:

• Item Code: Re-102
• Delivery Time: 4 to 5 Weeks

Product Details:

4 Zone Fire Alarm Control Panel, Ravel: RE-104 is a right blend of affordability design, user friendly, latest technology and quality for fire alarm panels. While implementing the latest in microprocessor technology for conventional panels ease to operate along with clear visible indications come at an advantage for the end user. These are stand alone panels with 2 and 4 zones versions. It has the optional facility for zone wise sounder / relay contacts

Product Details:

The SMX model is designed keeping in mind the needs of today’sperformance conscious establishments. Fire Projects Pvt Ltd deals in range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The SMX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall, connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile appl and the Bluetooth dongle connectivity.

USER INTERFACE
Display: 5-inch multi-color touch display
Control Keys: Silence Buzzer, Silence/Resound Alarm, Reset
Indicators: Power, Alarm Silenced, Trouble, System Trouble, Disabled Test Supervisory, Delay

Additional Information:

• Item Code: 915-100-402
• Delivery Time: 6 to 7 Weeks

Product Details:

Smoke Detector

Product Details:

Fire Projects deals in DXc1-Morley-IAS 1 Loop Fire Alarm Control Panel Features:

• Optional 40 or 80 zone alarm LEDs
• Easy 5 key-press set-up
• Large blue LCD display
• Supports USB upload/download
• Mobile phone style keypad and navigation keys
• Option to upload a company logo

Software Features:

• PC confi guration software (supplied with panel)
• 80 fi re zones (can be used with or without LEDs)
• 7 day timers
• Event logging
• Onboard diagnostics
• Class change function
• Coincidence and verifi cation detection for false alarm management
• Sensitivity adjustment e.g. between day and night
• Input/output logic

Hardware Features:

• Battery backed real-time clock (2 & 4 loop)
• 2 independent sounder circuits
• 500mA multi-protocol loop driver
• 2 x onboard monitored inputs
• Optional programmable keyswitch for selected functions
• Plug-in connectors

Other details:

• The Morley-IAS DX Connexion panel is ideally suited for use in the protection of small to medium sized buildings
• All in all, a compact, high performance, feature rich, economical fi re alarm control panel designed to help both the installer and the end user
• The multi-protocol DX Connexion range of fire alarm control panels has been developed to be the most time efficient fi re panel on the market to install
• Simply fix the control panel to the wall, connect the field wiring, power up and in as few as five button presses you can have a compliant, working fire alarm system

User Interface:

• Display: 6x40 character (240x64 pixels) blue liquid crystal display with backlight illumination
• Control Keys: Evacuate, Silence/Resound, Mute Buzzer, Extend Delay, System Reset, Show Alarm Zones
• Keys: keys and LED indicators
• Programming: 12 button alpha numeric key pad inc
• Keys: cancel and return keys plus 4 navigation keys and an OK key
• Indicators: Fire, Fault, Disablement, Test, Buzzer Muted, Delayed Mode, Sounders Silenced, sounders Disabled and Power. Also dedicated fault LEDs for System Fault, Supply Fault and Earth Fault. 40or 80 LED fi re zone indicators optional.
• Networking Features:
• Network up to 16 loops (16x1 loop panels, 8x2 loop panels, 4x4 loop panels or any mix up to max 16 loops)
• True peer-to-peer and fault tolerant network for high system reliability
• BS5839 part 1 compliant network

Fire Projects become first preference for fire alarm maintenance service partner for Morley Fire alarm control system.

Additional Information:

• Item Code: 714-001-115
• Delivery Time: 4 to 5 Weeks

Product Details:

Fire Projects Pvt Ltd Supply, Install, Test and Commission Honeywell STX Half Loop Fire alarm panel is designed keeping in mind the needs of today’s performance conscious establishments. It is a range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The STX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall,connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile app and the Bluetooth dongle connectivity.
Listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: S36244
KEY FEATURES OF STX-Half Loop Fire alarm Panel:

• Multiple loop options –half
• Up to 98 devices per full loop
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864

INTERFACES: 
• 3 Output Relays with single pole changeover 24V DC 1 A: Fire Trouble & Programmable (Supervisory by default)
• 1 RS485 port for up to 4 repeaters or mimics or a combination of the two
• 1 RS232 ports: One for serial printer
• 2 USB ports: One for pen drive and Honeywell Bluetooth dongle and one reserved for future use
• 1 NAC circuit with max 150 mA
• 2 on-board monitored inputs
 
Fire Projects is providing fire alarm system AMC service for Ahmedabad, Vaodara, Vapi, Ankleshwar, Halol, Dahej, Sanand, Changodar and Vithalapur Loation.

Additional Information:

• Item Code: 615-000-002-R
• Delivery Time: 5 to 6 Week

Product Details:

Fire Projects Pvt Ltd is supplying Honeywell Morley Lite is a Compact, High Performance, Feature enriched Fire Alarm Control Panel designed to meet the Fire Detection Addressability. Honeywell Morley-Lite Fire Detection Control Panel series is ideally suited for Small to Medium Sized Buildings, Residential Complexes, Banks, Healthcare, Restaurants, Retail Stores etc.

Morley Lite panels communicates via LiteSpeedTM protocol with Morley Lite detectors and devices. Morley Lite Panel is built with Combination of quick installation, enhanced feature set and advanced programming which allows installer to meet demands of the end user with flexibility in configuration. Equipped with configurable remote monitoring inputs, programmable relays, delay setting for alarm verification, software isolation of class B circuit and NAC outputs, mapping of NAC to specific class B circuits, password protections etc.

End users get clear visible indications, easy to operate functions to activate the control buttons, customizable class B circuit text via text inserts to meet building naming conventions. Reliable and trouble free system built as per latest safety standards of industry which ensures system is safe and protected. Internal memory lock feature to restrict changes to fire panel configuration by any intruder without key lock.

User Interface:

• 16 X 4 LCD display, aesthetically designed front facia.
• Individual Class B Circuit Isolation
• Customizable text inserts
• Programmable input for remote reset/evacuate/alert/fire
• Event Logging
• Lamp Test Facility
• Detectors/MCPs in same circuit
• Data/Time/Password configuration
• Separate configuration/user memories/system fault, sound/ resound feature like EN 54-4 standard
• Fire, Fault, Configurable Relay
• Circuit wise NAC configuration
• NAC Enable/Disable facility
• Monitored NAC and Class B Circuit for Open/Short/Faults
• PC tool for advanced configuration needs/ Event exploring
• One Man walk test facility
• Earth Fault Monitoring
• Staged Delay configuration for alarm verifrication
• Engineering Mute Configuration
• Aux output facility
• Mechanical Keylock

Morley Lite 2 Zone fire panel is Hybrid fire alarm system and suppport special HML series detector to which gives location of detector.

Fire Projects is providing fire alarm system AMC service for Ahmedabad, Vaodara, Vapi, Ankleshwar, Dahej, Sanand and Vithalapur Loation.

Additional Information:

• Item Code: HML-100-2A
• Delivery Time: 4 to 5 Weeks

Product Details:

Ravel 4 Zone Conventional Fire Alarm Control Panel - RE-2554 is UL Listed Conventional Fire Alarm control Panel. These control panels are designed to be used in small & medium commercial industries, buildings, hotels, schools, etc. and are compatible with conventional detectors, manual call points and normally open dry contact devices.

Features:

• Switched Mode Power Supply (95-245)V
• Modular Construction
• Auto Resettable Fuse
• Surge Protection
• Programmable AC loss delay/Trouble Remainder/Alarm Verification
• Battery polarity reversible protection
• Surface Mount Technology
• Over All current consumption is low.
• Fully complies with UL -864 and NFPA-72.
• Rugged CRCA sheet with powder coated finish.
• 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).

Product Details:

These two kinds of conventional fire alarm control panel are multi-wire control panels developed from microprocessor on EN 54-2. GST104 Conventional Fire Alarm Control Panel (hereinafter called GST104 control panel) can monitor 4 zones. GST102 Conventional Fire Alarm Control Panel (hereinafter called GST102 control panel) can monitor 2 zones. Those with signal output interface board has a passive normally open alarm output contact and fault output contact for each zone. Each zone can be connected with 15 conventional fire detectors. They can connect with C-9403 conventional sounder strobe on EN 54-3, C-9103 conventional heat detector on EN 54-5, C-9102 conventional smoke detector on EN 54-7, and C-9202 manual call point on EN 54-11. They have two external control output points to control some devices such as sounder strobe and sounder etc. The stated maximum load is two sounder outputs. They are designed with internal standby batteries and space for installation (two sealed acid storage batteries). They have functions of test and isolation, setting day/night mode, indication of normal state, fault state, alarm state, alarm of short circuit and open circuit of external connections and identifying the location of the detecting zone. The installation and operation of the two kinds of panel are very simple and convenient. All the control functions can be realized through a key switch, and the programming function can be realized through a key switch and an internal switch. Except for two monitoring zones (two zone input) less, two passive normally open alarm output contacts and two passive normally open fault output contacts less for those with signal output interface board, and some minor differences in appearance and structure, GST102 control panel is the same as GST104 control panel in technical specifications, usage and operation. We will take GST104 control panel as the example.

Product Details:

Fire Projects Pvt Ltd Supply, Install, Test and Commission Honeywell STX 1 Loop Fire alarm panel is designed keeping in mind the needs of today’s performance conscious establishments. It is a range of compact and feature-rich, modern-age panels that constitute together with a suite of intelligent devices, highly reliable fire alarm systems.
The STX panels meet the requirements of the latest codes and standards and allow for quick and easy installation. Just fix the panel to the wall,connect the field wiring devices, and power up the panel for a working fire alarm system. The large touch display allows the panel to be programmed easily by providing a clear menu structure, making the the entire setup process extremely intuitive. Complex configuration is made easy by using the mobile app and the Bluetooth dongle connectivity.
Listing and approval below apply to the modules specified in this. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: S36244
KEY FEATURES OF STX-1 Single Loop Fire alarm Panel:

• Multiple loop options –half
• Up to 98 devices per full loop
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864

INTERFACES: 
• 3 Output Relays with single pole changeover 24V DC 1 A: Fire Trouble & Programmable (Supervisory by default)
• 1 RS485 port for up to 4 repeaters or mimics or a combination of the two
• 1 RS232 ports: One for serial printer
• 2 USB ports: One for pen drive and Honeywell Bluetooth dongle and one reserved for future use
• 1 NAC circuit with max 150 mA
• 2 on-board monitored inputs

 Fire Projects is providing Addressable fire alarm control system installation service for hmedabad, Vaodara, Vapi, Ankleshwar, Dahej, Sanand and Vithalapur Loation.

Additional Information:

• Item Code: 615-000-102
• Delivery Time: 5 to 6 Weeks

Product Details:

Key Features of STX- 2-Morley-IAS 2 Loop Addressable Fire Alarm System - Red:

• Multiple loop options –half, 1 and 2 loops
• Up to 198 devices per full loop
• 160 fire zones
• 5,000 events log
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864 10th Edition Certified

Additional Information:

• Item Code: 615-000-202-R
• Delivery Time: 5 to 6 Weeks

Product Details:

Key Features of STX- 2-Morley-IAS 2 Loop Addressable Fire Alarm System - Grey:

• Multiple loop options –half, 1 and 2 loops
• Up to 198 devices per full loop
• 160 fire zones
• 5,000 events log
• Multiple output and input interfaces for a fully integrated fire alarm solution
• Pluggable electrical connectors and ergonomic design for easy installation
• Large touch display for enhanced readability, context-awareness and easy navigation resulting in exemplified user experience
• Mobile and PC apps for guided configuration
• Ability to configure panels offsite and sync via USB pen drive or Honeywell Bluetooth
• Battery-backed, real-time clock (RTC)
• 32-bit dual-core microprocessor
• UL 864 10th Edition Certified

Additional Information:

• Item Code: 615-000-202
• Delivery Time: 5 to 6 week

Product Details:

Key Features of NFS2-3030 Notifier Intelligent Fire Alarm Panel:

• Certified for seismic applications when used with the appropriate seismic mounting kit.
• Approved for Marine applications when a marine-listed version is used with marine-listed compatible equipment.
• Complies with UL 2572 Mass Notification Systems (NFS2- 3030 version 20 or higher).
• One to ten isolated intelligent Signaling Line Circuits (SLC) Style 4, 6 or 7.
• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology.
• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/3,180 per FACP or network node.
– Detectors can be any mix of ion, photo, thermal, or multisensor; wireless detectors are available for use with the FWSG.
– Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.
• Large 16 line, 640 character LCD backlit display or use display-less as a network node.
• Network options:
– High-speed network for up to 200 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA).
– Standard network for up to 103 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/400, AFP-1010, and AM2020). Up to 54 nodes when DVC-EM is used in network paging.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online/offline program option.
• With built-in Degraded Mode operation, the system is capable of general alarm if a fire alarm condition is present even if the central processing unit (CPU) fails.
• Weekly Occupancy Schedules allow changing sensitivity by time of day and day of week.
• EIA-485 annunciators, including custom graphics.
• History file with 4000-event capacity in nonvolatile memory, plus separate 1000-event alarm-only file.
• Advanced history filters allow sorting by event, time, date, or address.
• Alarm Verification selection per point, with automatic counter.
• Autoprogramming and Walk Test reports.
• Multiple central station communication options:
– Standard UDACT
– Internet
– Internet/GSM
• Positive Alarm Sequence (PAS) Presignal.
• Silence Inhibit and Auto Silence timer options.
• Field-programmable on panel or on PC, with VeriFire Tools program, also check, compare.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
• Up to 1000 powerful Boolean logic equations.
• Supports SCS Series smoke control system in both HVAC and FSCS modes.
• FM6320 approved Gas Detection System with FMM-4-20 module and any FM listed gas detector.
• EIA-232 printer port.
• EIA-485 annunciator port.

Additional Information:

• Item Code: NFS2-3030
• Delivery Time: 6 to 7 Weeks

Product Details:

Morley-IAS Loop Driver Card for ZX - Series is required with each Morley-IAS (LPCB approoved) Fire alarm control panel.
Single loop card accomodate (99 Detector + 99 Modules).

Additional Information:

• Item Code: 795-072-100
• Delivery Time: 5 to 6 Weeks

Product Details:

Key Features of RS485 Communication Module:

The RS485 communication module supports two-wire RS485 multidrop transmission between networked ZX2Se/ZXSe/ZX5Se control panels, between ZX series control panels and repeaters or between ZXseries control panels and serial peripheral devices. Using a shielded twistedpair cable with a cross sectional area of minimum 0.5 mm2 (24 AWG), the RS485 module will support cable/bus lengths of 1,200 meters (3937 ft) per channel.
When used to drive a peripheral bus the RS485 module can support remote I/O devices such as:
• Active and passive repeaters
• External printers
• 4-way programmable relay and sounder cards
• 8-way input cards
• 40-way mimic driver cards
• Modbus and pager interface modules
The RS485 communication module can also be used in conjunction with the Hi-485 conversion module for systems requiring a “High Integrity” loop for network communications. The Hi-485 nodes are able to detect and isolate transmission line faults such as short and open circuits on the network wiring.

 

Additional Information:

• Item Code: 795-004-001
• Delivery Time: 5 to 6 Weeks

Product Details:

Fire Fighter Telephone, Notifier: NFC-FTT is a Fire Fighter telephone system that provides secure and reliable communications for firefighters. This standalone system is capable of providingannunciation and control for local and remote telephone handsets. It includes a built in display and keypad that provide an indication of phone activation as well as corresponding trouble conditions. For added flexibility, 24 remote telephone connections are offered that can be monitored individually or as a group of multi-phone jacks. The auto-program feature automatically recognizes all existing fire fighter phone jacks on the system and immediately configures the system for full operation and supervision.

The NFC-FFT allows for up to ten users to plug in to a remote telephone jack (N-FPJ) and communicate simultaneously within a building. An onboard SLC circuit (capable of being wired in Class B (Style 4) or Class A (Style 6)) allows for continuous monitoring of the telephone jacks connected to the system. It is housed in a lockable cabinet that includes multiple knockout locations for field wiring.

Features of Fire Fighter Telephone, Notifier: NFC-FTT:

• Provides supervision control and annunciation of up to 24 remote telephone jacks.
• Built-in Auto-program feature.
• Simple and straightforward user interface.
• Telephone circuit supervised with 4.7KΩ, End of line resistor when wired in Style Y, Class B operation.
• Full System status LED display.
• Onboard SLC circuit can be wired for class A (Style 6 or Style 7) or class B (Style 4) configuration.
• Full system status LED display.
• Supports Multi-Phone Jack Audio Circuit supervision.
• Certified for seismic applications
• Onboard Form-C system trouble relay.
• Allows simultaneous operation of up to 10 Fire Fighter remote handsets (FHS-F when connected to the NFC-FFT.
• Fire Fighter Phone Jack (N-FPJ provides a plug-in location for the FHS-F.
• Fire Fighter Handset Cabinet (FHSC-R/S) is used to store five Fire Fighter Handsets (FHS-F).

Additional Information:

• Item Code: NFC-FTT
• Delivery Time: 5 to 6 Weeks

Product Details:

The Morley-IAS repeaters are compact remote control units for Morley-IAS intelligent multi protocol fire alarm control panels.

These units, along with other I/O peripheral devices and the external printer further enhance the flexibility and functionality of our fire alarm control panel range.

The repeaters provide an extension to the operation of the fire alarm control panel. There are two types available - passive with indications only and no controls, or active with both controls and indicators. Both display the operational state of the control panel using the 80 character LCD display and the 7 LED status indicators.

In addition to the general status indicators the Active repeater is fitted with key operated “Access Enable” switch for the control functions. Individual buttons are provided for System Reset, Mute, Accept, Sound Alarms, Silence/Re sound Alarms and Self test. Thus enabling control functions to be duplicated in strategic locations around the installation.

The Active repeater includes an integral self test sequence guiding the operator through a preset sequence to test the functionality of the control buttons, key-switch and display indicators.

Each repeater is connected to the Morley-IAS fire alarm control panels using the RS485 peripheral data port as shown in the schematic overleaf. A maximum of 31 active repeaters can be connected to the peripheral data port. The fire alarm control panel supervises the connection between itself and the repeater, proving the integrity of the cabling and indicating faults both on the repeater and the fire alarm control panel.

Passive repeaters are not supervised, but a loss of communication with the fire alarm control panel will be indicated on the passive repeater. The repeater requires an external power supply of +24Vdc (nominal) to operate. Power may be taken from the auxillary supply of the control panel or from any other suitable dc power supply.

Features:

• Compatible with all Morley-IAS intelligent multi-protocol fire alarm control panels
• Connects to RS485 peripheral bus
• Active or Passive options
• Backlit adjustable alphanumeric display
• General status LEDs
• Controls for system reset, accept, mute, silence alarms, and self test (active repeater only)
• “Access Enable” key-switch on active repeaterFire Projects always recommended to use repeater fire alarm control panel in security cabin or place where 24x7 human presence is available
• The Morley-IAS repeater control panels are compact remote control units for Morley-IAS intelligent multi protocol fire alarm control panels
• Morley-IAS products supplied by Fire Projects available with other I/O peripheral devices and the external printer further enhance the flexibility and functionality of our fire alarm control panel range
• Morley-IAS repeater fire alarm control panel provide an extension to the operation of the fire alarm control panel
• There are two types available - passive with indications only and no controls or active with both controls and indicators

Additional Information:

• Item Code: 709-601-001
• Delivery Time: 4 to 5 Week

Product Details:

The ZXSe range of intelligent fire alarm control panels has been designed to assist with the normal operation of a fire detection system. Standard weekly testing is available through a simple menu structure allowing selection of the zones to be tested either with or without activation of the output relays or sounders.

Additionally, the status of individual devices can be analysed to determine whether cleaning or replacement is required.

As the installation grows by Fire Projects Pvt Ltd the ZXSe panel can expand with the building or site by adding additional devices, loop cards, printers or repeater panels. Additionally, further ZXSe panels can be networked together allowing an even bigger system to be created.

Remote (or local) printers can easily be connected to provide a paper copy of events as and when they occur or provide a historical record.

• All major device manufacturers devices supported
• Optional, local or remote printers
• Walk test facility
• Provide up to 72hr stand-by (subject to verification)

 

Additional Information:

• Item Code: 720-001-301
• Delivery Time: 5 to 6 Week

Product Details:

Key Features of Notifier: NFS-320 Fire Alarm Control Panel:

• Certified for seismic applications when used with the appropriate seismic mounting kit
• Approved for Marine applications when used with listed compatible equipment. See DN-60688
• One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7
• Up to 159 detectors and 159 modules per SLC; 318 devices maximum
• Detectors can be any mix of ion, photo, thermal or multisensor wireless detectors are available for use with the FWSG
• Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG• Optional FWSG Wireless SWIFT Gateway supports wireless SLC devices
• Standard 80-character display
• Fire Projects recommend Notifier NFS-320 intelligent Fire Alarm Control Panel by Notifier for those who looking for reliable addressable fire alarm system
• NFS-320 is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER
• In stand-alone or network configurations, ONYX Series products from Notifier meet virtually every application requirement
• The Notifier NFS-320’s modular design makes system planning easier and that is reason it is first choice of Fire Projects (leading system integrator)
• The panel can be configured with just a few devices for small building applications or networked with many devices to protect a large campus or a high-rise office block
• Simply add additional peripheral equipment to suit the application. Wireless fire protection can be added with the SWIFT wireless gateway and devices
• Notifier NFS-320 supply and installed by Fire Projects is smart and intelligent fire alarm panel which Polls up to 318 devices in less than two seconds, activates up to 159 outputs in less than five seconds and multi-colour LEDs blink device address during Walk

 

Additional Information:

• Item Code: NFS2-320
• Delivery Time: 6 to 7 Weeks

Product Details:

Key Features of Modbus Interface Module:

The Modbus interface unit connects to the RS-485peripheral bus of the ZX series fire alarm control panels and allows panel interrogation by a Modbus controlsystem. Information on the states of panel outputs, peripherals, detectors and the general operating condition of the panel can be requested.
The unit consists of a circuit card mounted on a steel plate within a polycarbonate IP67 rated enclosure, as shown above. Pre-pressed knock-outs on the box sidesallow cable entry glands to be fitted for power and communication line wiring.
A DC supply in the range of 18-28 Vdc, typically 24 Vdc, rated at 150 mA, is required to power the interface, An on board switch mode power supply isolates this input from all communication circuitry. An adequate DC supply can be obtained from the fire control panels auxiliary 24 Vdc output (see fire control panel manual). An earth reference should be connected to the Modbus Interface Platforms Earth termination point from the supply earth (i.e. fire control panel entry gland).
 

Additional Information:

• Item Code: 795-057
• Delivery Time: 8 to 9 Weeks

Product Details:

Key Features of RS232 Communication Module:

The RS232 module also supports a single point-to-point transmission between a ZX2Se/ZX5Se control panel and graphic front end. When used in an ZX5e control panel, the RS232 module can also be used as a communication interface to the pager interface. This option is not available with a ZX1Se/ZX2e panel.
The AUTO-LEARN facility provided in the ZX series control panels saves considerable time and effort when installing new plug-in modules andperipheral devices or when changing system configuration. It allows the system to learn itself what modules and peripheral devices have been installed on the panel.

Additional Information:

• Item Code: 795-005
• Delivery Time: 5 to 6 Week

Product Details:

Key Features of LCM-320 Loop Control Module:

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM- 320s and five LEM-320s. The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

• Up to 12,500 feet (3,810 m) on a Class B (Style 4) SLC loop (twisted-unshielded).
• Built-in degraded mode increases survivability.
• Very simple installation — plug-in style.
• Permits multiple loops in small enclosure.

Additional Information:

• Item Code: LCM-320
• Delivery Time: 5 to 6 Weeks

Product Details:

Key Features of LCM-320 Loop Control Module:

The LCM-320 Loop Control Module and the LEM-320 Loop Expander Module provide NOTIFIER’s ONYX® Series of Fire Alarm Control Panels (FACPs) with Signaling Line Circuits (SLCs). The ONYX® Series NFS-640/NFS2-640 supports one LEM-320; the NFS-3030/NFS2-3030 supports up to five LCM- 320s and five LEM-320s. The LEM-320 module is used to expand the NFS-640/NFS2-640 to a second loop, and to expand each LCM-320 used on the NFS-3030/NFS2-3030 — each NFS-3030/NFS2-3030 LCM-320 supports an expansion LEM-320.

• Up to 12,500 feet (3,810 m) on a Class B (Style 4) SLC loop (twisted-unshielded).
• Built-in degraded mode increases survivability.
• Very simple installation — plug-in style.
• Permits multiple loops in small enclosure.

 

Additional Information:

• Item Code: LEM-320
• Delivery Time: 5 to 6 Weeks

Product Details:

Passive Repeater Panel, Morley-IAS: ZXr-P are compact remote control units for Morley- IAS intelligent multi protocol fire alarm control panels. These units, along with other I/O peripheral devices and the external printer further enhance the flexibility and functionality of our fire alarm control panel range.

The repeaters provide an extension to the operation of the fire alarm control panel. There are two types available - passive with indications only and no controls, or active with both controls and indicators. Both display the operational state of the control panel using the 80 character LCD display and the 7 LED status indicators.

Additional Information:

• Item Code: 709-701-001
• Delivery Time: 5 to 6 Week

Product Details:

The NOTIFIER NCA-2 Network Control Annunciator Panel is a second-generation Network Control Annunciator for the NOTI•FIRE•NET™ network, compatible for use with ONYX® Series nodes such as the NFS2- 3030, NFS-3030, NFS-320, NFS-640 and NFS2-640 fire alarm control panels, as well as first-generation NCA Network Control Annunciators. Additionally, the NCA-2 may be configured with DVC Series products to create one or more Digital Audio Command Centers on NOTI•FIRE•NET™. The NCA-2 provides system control and display capabilities for all, or for selected network nodes.
The NCA-2 display consists of a 640-character backlit LCD display, and a control interface consisting of “soft” keys usedto navigate screen menus, “hard” keys with fixed control functions, and a QWERTY keypad.
When connected to one or more networked panels the NCA-2 provides network control and status/history display capabilities. It may also be configured as the Primary Display for displayless nodes on the network.

Additional Information:

• Item Code: NCA-2
• Delivery Time: 5 to 6 Week

Product Details:

The Notifier Network Communication Card, Notifier: NCM-W provides NOTIFIER Intelligent Fire Alarm Control Panels, and NCA and NCA-2 Network Control Annunciators with a means to connect to NOTI•FIRE•NET™. Two types of NCM are available: NCM-W for connecting nodes with twisted-pair wire, and NCM-F for connecting nodes with fiber-optic cable.

Features of Network Communication Card bye Notifier: NCM-W
• Supports twisted-pair wire medium.
• NFPA Style 4 (Class B) operation or NFPA Style 7 (Class A) operation.
• Two programmable data thresholds.
• Transformer coupling provides electrical isolation between nodes.
• Pluggable terminal wiring with strain relief.
• Pluggable service connector (feeds signal directly through) in the event that power must be removed from a node.
• 312.5 Kbaud transmission rate.
• Data is regenerated at each node.
• Two network ports to allow simultaneous connection to fire alarm control panel and to programming computer.
• Enables software and database upload/download over NOTI•FIRE•NET™.
• Repeaters are available to increase signal.
• Repeaters may be utilized to switch media type.
• Up to 3,000 feet (914.4 m) between nodes in a point-to-point fashion (actual distance varies with wire quality).

NOTE: Do not mix NCM and High Speed (HS) NCM on the same system.

Additional Information:

• Item Code: NCM-W
• Delivery Time: 5 to 6 Weeks

Product Details:

Fault Isolator Module, Morley-IAS: MI-DISO is used on the Morley-IAS intelligent fire alarm control panels to protect the system against wire-to-wire short circuits on the analogue addressable loop wiring.

The fault isolator modules should be placed between groups of sensors on the loop wiring to protect the loop if a short circuit fault occurs. If a short circuit fault occurs, the two isolators located either side of the short circuit fault will automatically sense the voltage drop, open their switches and remove the devices from the rest of the loop. If the line voltage then rises above a fixed threshold, indicating that the short circuit fault is removed, then the isolator module will automatically restore the power to the isolated group of devices.

• DIN rail mounting option
• Surface mounting option
• Plug in connectors
• Tri-colour LED status indication
• Address selector switches visible in 2 planes
• LED status visible in 2 planes
• Approved to GEA GEI 1-082 and CEA GEI 1-084

Additional Information:

• Item Code: MI-DISO
• Delivery Time: 4 to 5 Weeks

Product Details:

Fault Isolator Module, Morley-IAS: MI-DISO-UL is used with the fire alarm control panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loop. The HM-DISO-UL should be placed between each device on the SLC loop to isolate a short circuit problem between the modules. It is required for true Style 7 operation, so that other devices can continue to operate normally in the event of a short circuit on the SLC.

The circuit is automatically opened when the voltage line drops below four volts. Fault Isolator Modules should be spaced between groups of addressable devices (maximum 25), in a loop that protects the rest of the loop. If a short occurs between any two isolators, then both isolators immediately switch to an open circuit state and isolate the groups of sensors between them. The remaining units on the loop continue to fully operate. The HM-DISO-UL Fault Isolator Module automatically restores the shorted portion of the communications loop to normal.

• Powered by SLC loop directly, no external power required
• Mounts in standard junction boxes (4.0”/10.16 cm square, 2.125”/5.398 cm deep)
• Integral LED blinks to indicate normal condition and illuminates steady when short circuit condition is detected
• High noise (EMF/RFI) immunity

Additional Information:

• Item Code: MI-DISO-UL
• Delivery Time: 5 to 6 Weeks

Product Details:

Output Control Module, Notifier: FCM-1 provides intelligent fire alarm control panels a circuit for Notification Appliances (horns, strobes, speakers, etc.). Addressability allows the FCM-1(A) to be activated, either manually or through panel programming, on a select (zone or area of coverage) basis.
Features of Output Control Module, Notifier: FCM-1:

• Built-in type identification automatically identifies these devices to the control panel.
• Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
• Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
• LED blink may be deselected globally (affects all devices).
• High noise immunity (EMF/RFI).
• The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
• Wide viewing angle of LED.
• SEMS screws with clamping plates for wiring ease.
• Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
• Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).

Additional Information:

• Item Code: FCM-1
• Delivery Time: 5 to 6 Weeks

Product Details:

Releasing Control Module, Notifier: FCM-1-REL is specifically designed for fire suppression releasing applications in Flash- Scan systems. Power to the release agent solenoid(s) runs through the module for full-time monitoring and supervision.

The FCM-1-REL Releasing Control Module uses a redundant protocol; the module must be armed with a pair of signals in order to activate. It will then enter a 3-second window awaiting a pair of confirmation signals. If no confirmation is received, the module will automatically reset. It also supervises the wiring to the connected load and reports the status to the panel as NORMAL, OPEN, or SHORT CIRCUIT. The module has two pairs of output termination points available for fault-tolerant wiring and a panel-controlled LED indicator. The module may be connected to either one 24VDC solenoid or up to two 12VDC solenoids (in series). To ensure proper operation, this module shall be connected to a compatible. Notifier system control panel only (list available from Notifier). In addition, please refer to Notifier Device Compatibility Document PN 15378 for the list of compatible solenoids.

Features of Releasing Control Module, Notifier: FCM-1-REL:

 Redundant protocol for added protection
 Configurable for Class A or Class B operation
 External supply voltage monitoring
 Can power one 24V or two 12V solenoids
 SEMS screws for easing wiring
 Panel controlled status LED
 Analog communications
 Rotary address switches
 Low standby current
 Mounts in standard 4" (10.16 cm) junction box
 FlashScan operation

Additional Information:

• Item Code: FCM-1-REL
• Delivery Time: 8 to 9 Weeks

Product Details:

The Notifier ISO-X(A) Fault Isolator Module is used with Notifier Onyx and CLIP series Fire Alarm Control Panels (FACPs) to protect the system against wire-to-wire short circuits on the SLC loops.

Features of Fault Isolator Module, Notifier: ISO-X

• Powered by SLC loop directly, no external power required.
• Base mounts on standard junction boxes (4.0"/10.16 cm square by 2.125"/5.398 cm deep).
• Integral LED blinks to indicate normal condition. Illuminates steady when short circuit condition is detected.
• High noise (EMF/RFI) immunity.
• Wide viewing angle of LED.
• SEMS screws with clamping plates for ease of wiring.
• Opens SLC loop automatically on detection of short, preventing the short from causing failure of the entire loop.
• Automatically resets on correction of short.
• Supports Style 4, 6, or 7 wiring.

Additional Information:

• Item Code: ISO-X
• Delivery Time: 5 to 6 Weeks